The influence of floating oil

Is oil and fine sludge floating in the tank of the machine?

If you are driving a machine, the lubricating oil of the machine and hydraulic fluid, the rust preventive oil and dirt that had adhered to the work by all means flow down into the tank and get mixed in the cutting fluid. The fine sludge generated during processing appears as floating oil on the liquid surface due to the difference in specific gravity with these oils and sticking.

Droding floating oil covering the liquid surface! !

Have you ever been surprised by soiling and foul odor by opening the lid of the tank?

Floating oil recovered in our separator

Flying oil containing fine sludge has various adverse effects.

It is difficult to recover floating oil containing fine sludge. However, if machining is continued with the cutting fluid left floating oil, it will have various adverse effects in machine body and machining.

* When the liquid level is covered with oil film, it becomes an environment blocked from air. Anaerobic bacteria are easy to breed and cause foul odors.

Bad odor in the summer, breakdown of the machine, stickiness of the oil ...

Do you spend a lot of time on troubleshooting, stopping the machine or wasteful expenses?

Report abuse